LMP-E191 For Sony Projector Lamp Sony ES7 EX7 EX7+ EX70ES7 EX7 EX7+ EX70 TX7
Product Parameter
| Part Numbers | LMP-E191 |
| Fittable projector models | For Sony Projector Lamp LMP-E191 Sony ES7 Sony EX7 Sony EX7+ Sony EX70 Sony VPL-ES7 Sony VPL-EX7 Sony VPL-EX7+ Sony VPL-EX70 Sony VPL-TX7 Sony VPL-TX70 Sony BW7 |
| Bulb Type | 210 W |
| Life time | 3000 -5000(Hours) |
| Packing | Carton box with foam |
| Minimum Order quantity | 10 piece |
Image Quality
Projectors often boast high image quality with features such as high resolution, brightness, and contrast ratio. These factors contribute to sharp and vibrant visuals.
Product Information
The Sony LMP-E191 replacement lamps are compatiable with Sony EX7 Sony EX7+ Sony EX70 projectors.The working hour time is:3000-5000 hours,After repalcing our new lamps,the projector performance can be the same of the new original one and improve the effect of projection,and make you feel comfortable while using.
Precautions
Remove the Old Lamp: Carefully detach the old lamp by following the instructions provided in the user manual. In some cases, the lamp may be held in place by screws or clips. Gently release the lamp and disconnect any cables or connectors attached to it.
Secure the Lamp Compartment: Once the new lamp is in place, secure the lamp compartment by reattaching any screws or latches that were removed earlier. Ensure that the compartment is sealed properly to prevent any dust or debris from entering.
Reset Lamp Timer: After installing the new lamp, it is essential to reset the lamp timer on the projector. This step varies by projector model, so refer to the user manual for instructions on how to reset the lamp timer.
Test and Calibrate: Turn on the projector and verify that the new lamp is functioning correctly. If necessary, adjust the projector settings to optimize the image quality and brightness.
Product Tags:
|
|
LMP-E191 Sony Projector Lamp For ES7 EX7 EX7+ EX70ES7 EX70 Images
|
